How to Care for Your Working Class Royalty EZ Clean Welding Angle Magnets

How to Care for Your Working Class Royalty EZ Clean Welding Angle Magnets

How to Care for Your Working Class Royalty EZ Clean Welding Angle Magnets

If you’ve just added the Working Class Royalty EZ Clean Welding Angle Magnets to your tool kit—congratulations! You’ve invested in one of the best welding accessories on the market. These powerful welding magnets will streamline your workflow, help you set precise angles, and improve efficiency in your shop. To get the most out of them, it’s important to follow a few simple care and maintenance tips that will extend their lifespan and keep them performing like new.

1. Understand the Power of Neodymium Rare Earth Magnets

Inside each EZ Clean Welding Angle Magnet are neodymium rare earth magnets, which deliver far stronger holding force compared to standard ferrite magnets. This means your joints, angles, and setups stay locked in place with confidence.

However, these magnets don’t handle heat well. At around 160°F (70°C), they begin to lose magnetism. The good news? Tack welding won’t damage them. Just remember to remove your magnets before making final weld passes, when higher temperatures can transfer into the tool.

2. Protect Your Magnets from Impact

All magnets—whether ferrite or rare earth—are naturally brittle. Dropping or throwing your welding angle magnets can cause fractures inside the material. When that happens, their clamping force weakens and precision suffers.

To keep your EZ Clean magnets in top condition:

  • Handle them carefully when moving around the shop.

  • Store them in a designated spot in your welding cart or toolbox when not in use.

3. Keep Your Welding Magnets Clean and Debris-Free

One of the biggest frustrations with traditional welding magnets is metal debris sticking to them. That’s exactly why the EZ Clean design is such a game changer.

When you notice metal dust or shavings collecting, just:

  • Blow off the surface with compressed air

  • Wipe them down with a clean rag

That’s it—no more picking tiny metal bits out of corners just to set up your welds. The EZ Clean system gets you back to work fast.

Why Proper Care Matters

Taking a few extra seconds to care for your welding magnets means:

  • Stronger, more accurate holds during fabrication

  • Longer lifespan for your investment

  • Faster setup times on every project

These small practices add up to more productivity and fewer frustrations in the shop.

Final Thoughts

Your Working Class Royalty EZ Clean Welding Angle Magnets are built to last, and with the right care, they’ll serve you on project after project. Treat them well, keep them clean, and you’ll enjoy precise, reliable holds every time you weld.

Looking for more high-quality welding tools and accessories? Check out the full lineup at WCR-Tools.com

FAQ

Q1: What makes EZ Clean Welding Angle Magnets different?
A: Unlike standard welding magnets, the Working Class Royalty EZ Clean Magnets feature a design that makes cleaning metal debris quick and easy. Just use compressed air or a rag and get back to welding.

Q2: Can welding magnets handle heat from welding?
A: Neodymium rare earth magnets inside your welding angle magnets lose strength at around 160°F. Tack welds are fine, but always remove them before final weld passes.

Q3: How do I clean welding angle magnets?
A: Simply blow off debris with compressed air or wipe them with a cloth. The EZ Clean design prevents metal shavings from sticking, saving you time and frustration.

Q4: Why should I avoid dropping welding magnets?
A: Welding magnets are brittle by nature. Dropping them can cause fractures inside, reducing their clamping force and accuracy. Always handle them carefully.

Q5: Where can I buy EZ Clean Welding Magnets?
A: You can purchase the Working Class Royalty EZ Clean Welding Angle Magnets and other welding tools directly at WCR-Tools.com.

Back to blog